-
-
ServicesCustomer demand as the center, strict quality system to ensure the production of products
-
AboutSet design, manufacture, installation, commissioning as one, specializing in the production of various non-standard equipment joint-stock enterprises.
-
-
Mandrel polishing machine
As a necessary pretreatment equipment for continuous chrome plating of the mandrel, the mandrel polisher is mainly used in the surface polishing after the repair process of the mandrel to improve the uniformity of the chrome plating layer. After polishing, the surface of the mandrel is smooth, without visible scratches, pits, peeling, cracks and other defects.
Classification:
Key words: electroplating production line
Product Description
As a necessary pretreatment equipment for continuous chrome plating of the mandrel, the mandrel polisher is mainly used in the surface polishing after the repair process of the mandrel to improve the uniformity of the chrome plating layer. After polishing, the surface of the mandrel is smooth, without visible scratches, pits, peeling, cracks and other defects.
Equipment characteristics：
1、Maximum rotation diameter of the bed body: 500mm
2、Minimum rotation diameter of bed body: 100mm
3、Maximum workpiece length: 15m
4、Maximum workpiece weight between the two top rooms: 15T
5、Working guide rail form: rectangular + flat form double guide rail structure
6、Spindle speed: 20-120 r/min, mechanical, stepless variable speed
7、Leaf wheel diameter: 150 —— 350mm
Equipment characteristics：
1、The equipment releases the expensive lathe processing resources, solves the contradiction of large workpiece polishing occupying the lathe, and can quickly polish the slender rod material of different diameters.
2、Each polishing head is equipped with a vacuum cleaner, following the slide movement, which can be used to collect dust particles during polishing to reduce environmental pollution.
3、The equipment is equipped with the main control box, which can be used for the main loop control and the spindle frequency conversion speed control. The equipment structure is simple, easy to adjust, widely praised.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
The name of the equipment is mandrel continuous chrome plating line，a mature product of our company. The electroplating line was produced in 2004, and was approved by the relevant national eia.The 60-meter-long production line, 3 people can fully operate, greatly improving production efficiency and saving labor costs.
This equipment is a new product for our company and solves the long-standing problem of thread phosphating in drilling enterprises. It can timely, effectively and quickly phosphorate the threads at both ends of the mandrel, to avoid the quality problems existing in the previous phosphorization.
This equipment is a special equipment for partial phosphating of the thread of the mandrel to achieve the effect of rust prevention and occlusion. The equipment design and manufacturing technology is mature, has been exported to Saudi Arabia, began to enter the international market.
Online Message
Luoyang Hongyang Machinery Co., Ltd
Service Hotline:
Address: Dongma Gou Industrial Park, Luoyang High-tech Development Zone, Henan Province (Wuhan South Road)
Focus on us
Copyright©2023 Luoyang Hongyang Machinery Co., Ltd. www.300.cn SEO This website supports IPV6