-
-
ServicesCustomer demand as the center, strict quality system to ensure the production of products
-
AboutSet design, manufacture, installation, commissioning as one, specializing in the production of various non-standard equipment joint-stock enterprises.
-
-
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
Key words: electroplating production line
Product Description
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
technical parameters
1、Processed workpieces
Length range: 6-8m
Diameter range: Φ40～Φ80mm
2、Electroplating characteristics：
Chrome layer thickness: 45～75um
Chrome plating speed：1.2～2.0m/h，stepless adjustable
Transporting speed：6m/h
3、Equipment characteristics：
Multi-channel electroplating production line is an upgraded version of the original main product —Mandrel chrome plating line. It has the following characteristics:
1)Automatic loading and unloading:
The workpiece is lifted to the special material rack, and the mechanical arm automatically puts the workpiece on the drive roller path. At this time, drive the roller movement at a uniform speed, so that the workpiece enters a series of processes according to the process setting. When the workpiece electroplating is completed, the signal is sent out, and the mechanical arm automatically lifts the workpiece and puts it on the finished material rack.
2)Unique detection technology:
The equipment is equipped with detection equipment at each point to monitor the operation of each main part. Once any abnormal situation occurs, the alarm will automatically alarm.
3)、Control system optimization:
The fourth generation of products have further optimized the control system design, all the working status and operating parameters of the equipment are displayed on the screen, at a glance.
4)、Environmental protection：The equipment has a perfect waste-water recycling system, which can realize almost zero discharge of chrome-plated wastewater, in line with the requirements of national and international laws and regulations.
5)、Reasonable layout:
All the equipment is the company targeted special design, reasonable layout. Therefore, the equipment floor area is minimized to save space.
6)Multi-channel electroplating:
Multiple rod materials are plated simultaneously, which will greatly provide production efficiency.
Previous Page
Related Products
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
The name of the equipment is mandrel continuous chrome plating line，a mature product of our company. The electroplating line was produced in 2004, and was approved by the relevant national eia.The 60-meter-long production line, 3 people can fully operate, greatly improving production efficiency and saving labor costs.
This equipment is a new product for our company and solves the long-standing problem of thread phosphating in drilling enterprises. It can timely, effectively and quickly phosphorate the threads at both ends of the mandrel, to avoid the quality problems existing in the previous phosphorization.
This equipment is a special equipment for partial phosphating of the thread of the mandrel to achieve the effect of rust prevention and occlusion. The equipment design and manufacturing technology is mature, has been exported to Saudi Arabia, began to enter the international market.
Online Message
Luoyang Hongyang Machinery Co., Ltd
Service Hotline:
Address: Dongma Gou Industrial Park, Luoyang High-tech Development Zone, Henan Province (Wuhan South Road)
Focus on us
Copyright©2023 Luoyang Hongyang Machinery Co., Ltd. www.300.cn SEO This website supports IPV6