-
-
ServicesCustomer demand as the center, strict quality system to ensure the production of products
-
AboutSet design, manufacture, installation, commissioning as one, specializing in the production of various non-standard equipment joint-stock enterprises.
-
-
Quenching equipment
This line is mainly used for quenching, normalizing, quenching and tempering, tempering and other heat treatment of long rod (shaft) and long pipe fittings. The commonly treated steel grades are H13, H11, SAE4145, etc., with specifications of φ 80-460 × 4000-20000mm. Can be refined, forging forming mandrel blank, quenching, tempering treatment, to achieve quenching and tempering heat treatment.
Classification:
Key words: electroplating production line
Product Description
This line is mainly used for quenching, normalizing, quenching and tempering, tempering and other heat treatment of long rod (shaft) and long pipe fittings. The commonly treated steel grades are H13, H11, SAE4145, etc., with specifications of φ 80-460 × 4000-20000mm. Can be refined, forging forming mandrel blank, quenching, tempering treatment, to achieve quenching and tempering heat treatment.
Features:
1. The two cover-type resistance furnaces are suitable for quenching and tempering. The handling truck and quenching oil tank system are arranged in a straight line to improve efficiency. In addition, a manual safety device is provided, which can manually release the brake to put the workpiece into the slot in the case of sudden power failure, so as to reduce the occurrence of accidents.
2, with temperature alarm system and emergency response system, to ensure normal work, improve the hardenability of the workpiece at the same time, to remind the operator to pay attention to the tank liquid situation, timely control of the tank liquid temperature.
3. The heating rate of the heating furnace is carried out in strict accordance with the heating curve according to the program, and the process parameters such as the speed of the workpiece entering and leaving the quenching tank are automatically controlled by PLC.
Main technical parameters
The total capacity is 3300Kw.
Rated power of resistance furnace; 1200Kw (single)
Contemp temperature: 850 to 1200 °C/550 to 650 °C
Factory degree: 9 to 19m
Maximum weight of lifting workpiece: 25T
Previous Page
Related Products
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
The name of the equipment is mandrel continuous chrome plating line，a mature product of our company. The electroplating line was produced in 2004, and was approved by the relevant national eia.The 60-meter-long production line, 3 people can fully operate, greatly improving production efficiency and saving labor costs.
This equipment is a new product for our company and solves the long-standing problem of thread phosphating in drilling enterprises. It can timely, effectively and quickly phosphorate the threads at both ends of the mandrel, to avoid the quality problems existing in the previous phosphorization.
This equipment is a special equipment for partial phosphating of the thread of the mandrel to achieve the effect of rust prevention and occlusion. The equipment design and manufacturing technology is mature, has been exported to Saudi Arabia, began to enter the international market.
Online Message
Luoyang Hongyang Machinery Co., Ltd
Service Hotline:
Address: Dongma Gou Industrial Park, Luoyang High-tech Development Zone, Henan Province (Wuhan South Road)
Focus on us
Copyright©2023 Luoyang Hongyang Machinery Co., Ltd. www.300.cn SEO This website supports IPV6