-
-
ServicesCustomer demand as the center, strict quality system to ensure the production of products
-
AboutSet design, manufacture, installation, commissioning as one, specializing in the production of various non-standard equipment joint-stock enterprises.
-
-
Power output press-fitting line
This assembly line is suitable for two models of diesel engine 6M3Z-M96.81000 and 4 RBZT-96.81000, which can assemble their power output units. The equipment adopts the annular multi-working station step form, which has the advantages of high working efficiency, safety and reliability.
Classification:
Key words: electroplating production line
Product Description
This assembly line is suitable for two models of diesel engine 6M3Z-M96.81000 and 4 RBZT-96.81000, which can assemble their power output units. The equipment adopts the annular multi-working station step form, which has the advantages of high working efficiency, safety and reliability.
Technical parameters:
- Production beat: 4-8min/set
- Total length and width of assembly line: 13.5m × 4.2m
- Working interval: 1.25m
- Number of stations: 24
- Movement form: step type
- Moving speed: 3 m/min
Equipment characteristics：
1. The trolley is equipped with guidance and positioning device for easy assembly. And the positioning support can be flexibly replaced to accommodate different power units.
2. The equipment is equipped with a safety clutch. When the equipment fails, the safety clutch will automatically detached. When the fault is removed, the safety clutch will automatically reset and the equipment can operate normally. This can ensure safe production.
3. When all the 8 stations on the assembly line press the confirmation button, the drive device will start and the chain stops after a certain distance. When the chain moves forward, when a station presses the emergency stop button, the chain stops immediately.
Previous Page
Previous Page
Related Products
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
The name of the equipment is mandrel continuous chrome plating line，a mature product of our company. The electroplating line was produced in 2004, and was approved by the relevant national eia.The 60-meter-long production line, 3 people can fully operate, greatly improving production efficiency and saving labor costs.
This equipment is a new product for our company and solves the long-standing problem of thread phosphating in drilling enterprises. It can timely, effectively and quickly phosphorate the threads at both ends of the mandrel, to avoid the quality problems existing in the previous phosphorization.
This equipment is a special equipment for partial phosphating of the thread of the mandrel to achieve the effect of rust prevention and occlusion. The equipment design and manufacturing technology is mature, has been exported to Saudi Arabia, began to enter the international market.
Online Message
Luoyang Hongyang Machinery Co., Ltd
Service Hotline:
Address: Dongma Gou Industrial Park, Luoyang High-tech Development Zone, Henan Province (Wuhan South Road)
Focus on us
Copyright©2023 Luoyang Hongyang Machinery Co., Ltd. www.300.cn SEO This website supports IPV6