-
-
ServicesCustomer demand as the center, strict quality system to ensure the production of products
-
AboutSet design, manufacture, installation, commissioning as one, specializing in the production of various non-standard equipment joint-stock enterprises.
-
-
Diesel engine cylinder liner pressure equipment
The equipment is used for a 4 cylinder or 6 cylinder diesel engine. Production and use of pressing line for dry and wet cylinder block.
Classification:
Key words: electroplating production line
Product Description
The equipment is used for a 4 cylinder or 6 cylinder diesel engine. Production and use of pressing line for dry and wet cylinder block.
1、technical parameters
● Bed body (plane): 10001000mm
● Hydraulic station (plane, including cooling system): 12001200mm
● Equipment system pressure: 32MPa
● Working pressure: 25 MPa
2、Equipment characteristics：
1. Equipment operation can be controlled either manually or automatically. 1 to 6 cylinders can be pressed simultaneously as needed.
2. The equipment is equipped with a workpiece positioning device to ensure the sleeve quality.
3.Users can adjust the work pressure according to the specific situation to achieve the best results.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Multi-channel electroplating production line
The device is optimized on the basis of Mandrel chrome plating line, and is suitable for the slender shaft and piston rod with smaller diameter and long length. Compared with the chrome-plated line, the equipment is smaller in structure, small in area, simpler in operation and supports multiple rod plating at the same time. 3 persons can take full control of the device. Greatly improve the production efficiency, save land occupation and hydro-power resources.
The name of the equipment is mandrel continuous chrome plating line，a mature product of our company. The electroplating line was produced in 2004, and was approved by the relevant national eia.The 60-meter-long production line, 3 people can fully operate, greatly improving production efficiency and saving labor costs.
This equipment is a new product for our company and solves the long-standing problem of thread phosphating in drilling enterprises. It can timely, effectively and quickly phosphorate the threads at both ends of the mandrel, to avoid the quality problems existing in the previous phosphorization.
This equipment is a special equipment for partial phosphating of the thread of the mandrel to achieve the effect of rust prevention and occlusion. The equipment design and manufacturing technology is mature, has been exported to Saudi Arabia, began to enter the international market.
Online Message
Luoyang Hongyang Machinery Co., Ltd
Service Hotline:
Address: Dongma Gou Industrial Park, Luoyang High-tech Development Zone, Henan Province (Wuhan South Road)
Focus on us
Copyright©2023 Luoyang Hongyang Machinery Co., Ltd. www.300.cn SEO This website supports IPV6